Profiles
of Exportable Technologies from
Small & Medium Enterprises in Delhi and NCR
A.
EXECUTIVE SUMMARY
B.
Conclusions & Recommendations
C.
Profiles of Exportable
Technologies
EXECUTIVE SUMMARY
Department
of Scientific & Industrial Research (DSIR), Ministry
of Science & Technology, Government of India, supported
National Foundation of Indian Engineers (NAFEN) to undertake
the following project :-
Profiles of Exportable Technologies from Small & Medium
Enterprises in Delhi and NCR
The main
highlights of the study are as follows
:
Ü
Sample Size :
70 units --20% of the Universe size --350 Small & Medium
Enterprises (SMEs) in and around Delhi.
Ü
Sectors and items covered by the identified SMEs
were as follows: -
|
Sl. No.
|
Sectors
|
Items
|
|
1.
|
Construction
|
·
Builders’
Hardware
·
Cement
Plant & Machinery
·
Concrete
Mixers
·
Doors
& Windows
·
Processes
for Fly-Ash Utilization
·
Pre-Fabricated
Construction
·
Sanitary-ware
|
|
2.
|
Electricals
|
·
Air
conditioners & De-humidifiers
·
Compact
Fluorescent Lamps
·
Control
Panels
·
Custom
Built Switches
·
Motors
·
Generators
·
HT
& LT Panels
·
Inverters
·
L.T.
Switchboard
·
MCB
·
Micro
Controller Modulators
·
Remote
Controller
·
TV
Kits
·
Washing
Machines
|
|
3.
|
Electronics & Telecom
|
·
EPABX
Systems
·
Telecom
Equipment
·
Traffic
Signal Controllers
|
|
4.
|
Light Engineering/ Mechanicals
|
·
Auto
Parts
·
Bearings
·
Blowers
·
Carbon
Dioxide Gas Plants
·
Compressors
·
Gear
& Gear Boxes
·
Industrial
Rollers
·
Industrial
Tools
·
Lathe
·
Machine
Tools
·
Motor
Parts
·
Piston
Rings
·
Pump
& Pumping System
·
Shapers
·
Solvent
Extraction Plants
|
|
5.
|
Water Management
|
·
Treatment
of Waste Water
·
Water
Treatment Plant
|
Ü
A Questionnaire was circulated to all the 350 units
for data collection. After a preliminary desk study and telephonic
survey,
70 SMEs in and around Delhi were short listed for visits and data collection.
Ü
42 respondents returned the questionnaire, duly filled
in.
Ü
Profiles
of 22 of these responding organisations have been given
in section II of the report.
Also given is a list of remaining 20 responding organisations
immediately following the profiles.
Ü
Overall
status of questionnaires received and profiles prepared
for inclusion in the report can be seen from the following
table:-
|
S. No.
|
Sectors
|
Number of Technology Profiles
|
|
|
Total NCR
|
Delhi
|
Noida, Ghaziabad, Modinagar
|
Gurgaon, Faridabad,
Karnal
|
|
1.
|
Construction
|
[05] (01)
|
[04] (00)
|
[01] (01)
|
----
|
|
2.
|
Electricals
|
[07] (04)
|
[01] (01)
|
[05] (02)
|
[01] (01)
|
|
3.
|
Electronics & Telecom
|
[09] (03)
|
[07] (02)
|
[02] (01)
|
----
|
|
4.
|
Light
Engineering (Mechanical)
|
[19] (14)
|
[12] (09)
|
[03] (01)
|
[04] (04)
|
|
5.
|
Water Management
|
[02] (- -)
|
[02] (- -)
|
----
|
----
|
|
Total
|
[42] (22)
|
[26] (12)
|
[11] (05)
|
[05] (05)
|
Figures in ( ) indicate profiles
prepared and included in the report. Similarly figures in
[ ] indicate questionnaires received.
Ü
The following profiles have been included in the report for
exploring export potential.
|
Sl.No.
|
Sectors
|
Profile Titles
|
Company
|
|
1.
|
Construction
|
Fly-Ash / Sand Lime Bricks / Pavers
|
Jayem Manufacturing
Company, Noida
|
|
2.
|
Electrical
|
Compact
Fluorescent Lamps
|
Indo Asian Fusegear Limited, Noida
|
|
|
|
Low Tension Electrical Switchboards
and Bus Ducts
|
Milestones Switchgears (P) Ltd., Gurgaon
|
|
|
|
Miniature
Circuit Breakers
|
Indo Asian Fusegear Limited, Noida
|
|
|
|
PVC/ XLPE
Wires & Cables
|
Cap Cab India Limited, Delhi
|
|
3
|
Electronics & Telecom
|
Embedded Technology based Information Display Systems
|
Embedded Techsystem Promotion Organisation,
New Delhi
|
|
|
|
Telecom
Switches for Voice & Data applications
|
Coral Telecom Limited, Noida
|
|
|
|
Traffic
Signal Controllers
|
Onnyx Electronics,
Delhi
|
|
4.
|
Light Engineering (Mechanical)
|
Auto Parts
|
Automotion
Industries, Delhi
|
|
|
|
Automatic
Plastic Injection Moulding Machines
|
Vishavakarma
Hydraulic Machines, Delhi
|
|
|
|
Carbon
Dioxide Gas Plants
|
S.S. Foundry
Chemical Industries Pvt. Ltd., Delhi
|
|
|
|
Exhaust
System Assembly for Automobiles
|
Shyam Engineering
Works, Delhi
|
|
|
|
Hydraulic Presses for Scrap Baling
& for Rubber & Composite Material Moulded
Parts
|
Santec
Hydrofluid Engineers, Delhi
|
|
|
|
Medical
Heating Pads
|
Senso Medi
Systems, Delhi
|
|
|
|
Precision
Cylindrical Grinding Machines
|
SRB Machines
Pvt. Ltd., Ghaziabad
|
|
|
|
Precision
Machined Components for various industrial applications
|
Sunrise Automotive Limited, Gurgaon
|
|
|
|
Precision
Sheet Metal Components for 2& 4 Wheelers
|
Indo Industrial
Engineers, Faridabad
|
|
|
|
Refrigeration
& Air Conditioning Compressors
|
Sea Bird
Refrigeration, Delhi
|
|
|
|
Solvent
Extraction Plants
|
Mecpro
Heavy Engineering Ltd., Delhi
|
|
|
|
Soya Milk Powder & Tofu Manufacturing
Plant
|
SSP Pvt.
Limited, Faridabad
|
|
|
|
Submersible Pumps
|
Oswal Electricals
(Pumps), Karnal
|
|
|
|
Tractor & Auto Parts
|
Kew Precision
Parts Pvt. Ltd., Delhi
|
Ü
17 respondents
have indicated SAARC and 16 respondents have indicated Middle East as the most potential markets for export
of technologies/projects.
TOPG
SECTOR – CONSTRUCTION
1. Technology for Manufacturing
Plants for Production of Fly-Ash / Sand Lime Bricks /
Pavers
1.
Technology Description
The machines are hydraulically
operated, automatic, PLC controlled and self diagnostic
type and have digital displays. The machine develops approximate
40 tones of hydraulic compressive force on the bricks for
the required time to make the bricks uniform.
The Bricks produced gain high strength after water
curing, starting from approx. 100 kg/sq.cm and going upto
approx. 200 kg/sq.cm. (Normal Burnt Brick strength seldom
reaches 70 kg/sq.cm.)
The machines are robustly
constructed, steel structured, heavy duty for taking all
types of heavy loads due to variations in raw materials.
The plant gives very
high production at a very economical cost and can be continuously
run due to its hydraulic oil cooling arrangement and 3 stationed
PLC controlled hydraulic table rotation with manual and
auto operations.
Various types and sizes
of moulds can be fitted with a maximum size of 230x230x100
mm. All types of monograms (Embossed or Engraved) can be
made on the bricks.
The Plant consists of the following equipment
:-
1.
Weigh Batcher for releasing uniform and
pre-determined input for Pan Mixer.
2.
Pan Mixer for mixing and grinding the
mix.
3.
Conveyor.
4.
Automatic PLC controlled, hydraulic Brick
Making Machine.
5.
Hydraulic pallet trolleys, at least 2
nos. per plant.
6.
Water pump electrically operated.
7.
Control panel.
8.
Hydraulic Compression Testing Machine,
Electric operated.
Optional equipments
for the plant are:
v
Steel / Wooden Pallets to manually handle
the bricks for effortless and easy transportation.
v
Wheel Baroow 250 kg. cap.
v
Batching system for weighing arrangement
with dial / digital display,
v
Radial Scrapper for Fly Ash and Sand Loading
&
v
Screw Conveyor with Hopper for either
Lime and Gypsum or cement with Bag Openers.
2.
Technology / Product
Status
The company is in operation
for last 16 years. After more than a decade of substantial
research and development, these plants have established
themselves as the most versatile Brick Making Plants.
Major customers include National Building Construction
Corporation, National Thermal Power Corporation, Andhra
Pradesh Generation Co. Ltd. and many other major reputed
private builders.
3.
Company Profile
Company Name
: M/s. JAYEM MANUFACTURING COMPANY
Address : C-99, Sector – 4,
Noida – 201301 (U.P.) India.
Tel. : +91-95120-2520242, 2538136
Fax : +91-95120-2530163
Contact Person :
Mr. J.L. Dhawan, CEO
E-mail : jldhawan@yahoo.com
Web Site : -
Year of Establishment : 1988
Product (s) Manufactured :
Fly Ash / Gypsum / Sand Lime Brick Making Plant,
Concrete Blocks Laying Machines, Vibro-presses, Vibrating
Tables, Rebar Bending & Cutting Machines. Floor Cutters for Concrete
& Asphalt etc.
Installed
Capacity per Annum : 1000 Plants & Machines of types
listed under
‘Products Manufactured’
Production (2002-03) : 400 Plants & Machines
Sales Turnover (2002-03) :
INR Rs. 12.5 Million (US$ 0.28 Million)
Exports
: Products are being exported to South
Asia Region by Merchant Exporters
Conformity to Standards :
Indian Standards
Compliance to ISO : No
Foreign Collaboration : Nil
Manpower Total (Nos.) :
50
Raw Materials / Equipment :
Steel, Rubber Parts, Hydraulic parts, Electrical
& Used Electronic Components.
Effluent Generated : Nil
4.
Broad Profile of Project Offer
|
Project Features
|
Project I
(Setting up Facility for Fabricating Plants for Making Fly Ash
Bricks, Blocks & Interlocking Pavers)
|
Project II
(Supply of Plant for Manufacturing Fly Ash Bricks, Blocks &
Interlocking Pavers)
|
|
Capacity per Annum
|
20 plants
|
60 Million Bricks
|
|
Land Requirements
|
2000 Sq. Mtr.
|
4000 Sq. Mtr.
|
|
Building Requirements
|
800 Sq. Mtr.
|
600 Sq. Mtr.
|
|
Plant & Machinery and Test Equipment
|
Lathe Machines, Shaper Machines,
Drilling Machines, Welding Machines, Hydraulic Sheet
Bending Press, Air Compressors, Rock Well Hardness
Testing Machines, Test Equipment, Vibration Testing
Apparatus, Hydraulic Pressure Testing Equipments,
Test instruments.
|
Weigh Batcher JJ500WBD, Pan Mixer
Model PM 500, Belt Conveyor, Brick Machine Model JJ1500
BMM, Hydraulic Pallet Trolley, Hydraulic Compression
Testing Machine Electric Operated, Weigh Balance.
|
|
Electrical Installation
|
40 KW
|
30 KW
|
|
Implementation Period
|
1 Year
|
6-8 months
|
|
Manpower Required
|
40
|
15
|
|
Raw Materials / Equipment
Required
|
Steel, Rubber Parts, Hydraulic Parts, Electrical and Electronic Components.
|
Fly Ash, Sand, Lime, Gypsum or Cement
|
|
Total Project Cost
|
US$ 0.2 Million (excluding land & building)
|
US$ 34,000 (excluding land & building)
|
|
Expected Annual Sales
|
US$0.7 Million
|
US$0.2 Million
|
|
Profitability
|
Approx. 35%
|
Approx. 25%
|
|
Form of Offer
|
Know – how, Joint Venture
|
Turnkey Project
|
TOPG
SECTOR – ELECTRICALS
2. PVC / XLPE Wires
& Cables
1.
Technology Description
Conductors for Cables
are made from Electrolytic Grade Copper / Aluminium to ensure
compliance with Global Standards.
Annealed conductors are bunched together on custom-built
heavy duty bunching machines to impart concrete shape to
conductors.
Solid and bunched conductors
are insulated on ultra modern extrusion machines with high
tech. PVC compound or other insulating materials as per
requirements and category of the cables.
To manufacture multi core cables, the insulated cores
are laid up to form a concentric shape. Inner cores are coded for identification as
per National / International Coding System or as per Customers’
Specifications.
Outer sheeting, breading,
armouring is also provided to make the cables meet the extreme
climates requirements, and to minimize chances of electrical
failures which may cause damage to expensive appliances,
instruments and machinery etc.
2.
Technology / Product
Status
The company is in production
for last 20 years and various varieties of cables manufactured
by the company are well established in the Indian market. The important customers are Bharat Heavy Electricals
Limited, Bombay Suburban Electricity Supply, Gas Authority
of India Ltd., Hindustan Petroleum Corp. Ltd., NTPC, Jawaharlal
Nehru Port Trust, Pepsi, Philips, Toyo Electric etc.
3.
Company Profile
Company
Name
: M/s. CAPCAB INDIA LTD.
Address : 7, Central Market,
West Punjabi Bagh, Delhi - 110026.
Tel. : +91-11- 25168686, 25936584,
25936983
Fax : +91-11- 25169696
Contact Person :
Mr. Randeep Singh, Marketing Manager
E-mail
: sales@cciindia.com, capitalc@vsnl.com
Web Site :
www.ccicable.com
Year of Establishment : 1983
Product(s) Manufactured : Electrical Wires & Cables, Instrumental Signal Cables, Thermocouple
Extension / Compensating Cables, Power / Control Cables
& Flexible, Telephone Cables, Flat Cables, FRLS Cables,
Special Cables for High Temperature Applications, Heating
Cables
Installed Capacity per Annum : 10 Billion Kms.
Production (2002-03) : 5 Billion Kms.
Sales Turnover (2002-03) : INR Rs. 50 Million (US$ 1.1 Million)
Exports
: INR Rs. 2.25 Million (US$ 0.05 Million)
Conformity to Standards : Indian Standards
Compliance to ISO : Yes
Foreign Collaboration : No
Manpower Total (Nos.) : 25
Raw Materials / Equipment Used : Electrolytic
Grade Copper Conductor, PVC
Compound, GI Round Wire / Flat Strip
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project Features
Project
: PVC / XLPE Wires & Cables Manufacturing
Plant
Capacity per Annum : 10 Billion Kms.
Land Requirements : 1200 Sq. Mtr.
Building Requirements : 800 Sq. Mtr.
Plant
& Machinery and
: Horizontal & Vertical Laying
Machines, Stranding cum Laying Machines, Conductor Bunching
Machines, Tapping Machines, Extruders, Wire Drawing Machines,
Spark Testing Equipment, Meggers, High Voltage Testing
Equipments, Flammability Testing Equipment, Thermal Stability
/ Heat Shrink / Shrinkage Testing Equipment etc.
Electrical Installation : 40 KW
Implementation Period : 8-12 Months
Manpower Required : 20
Raw Materials / Equipment
: Electrolytic Grade Copper Conductors Wires,
Aluminium Conductors Wires &
Strips, Thermocouple Conductors, PVC Compound, Foam Polyethylene
Total Project Cost : US$ 0.4 Million (excluding land & building)
Expected Annual Sales : US$ 0.6 Million
Profitability : 15%
Form of Offer
: Turnkey Project
TOPG
SECTOR
– ELECTRICALS
3. Compact Fluorescent
Lamps
1.
Technology Description
Compact Fluorescent
Lamps (CFL) are way ahead of conventional bulbs in every
aspect like light quality, application and designs.
CFL consume about 20%
power as consumed by regular bulbs and are instant start
with Electronic Ballasts within a large input voltage range
of 100-300 volts. CFLs are made in single, double and triple configurations
and in a variety of colour and temperatures from cool day
light to warm yellow light.
2.
Technology / Product
Status
The technology offered
by this company is time proven and price competitive. The production facility is one of the largest
in India. The company is in operation for last 20 years.
The products are being exported to U.K.,
Saudi Arabia,
Sri Lanka,
Bangladesh,
Nepal
and Middle East Countries.
3.
Company Profile
Company Name
: M/s. INDO ASIAN FUSEGEAR LIMITED
Address : A-39 Hosiery Complex,
Phase II Extn., Noida-201305, U.P.
Tel. : 95120-2568472, 2568093-98
Fax : 95120-2568473
Contact Person :
Mr. Vinay Mahendru,
Executive
Director
E-mail
: ecolite@indoasian.com
Web Site : www.indoasian.com
Year of Establishment : 1984
Product(s)
Manufactured
: 1. Switchgears 2. Lighting Products
Installed Capacity per Day : 20,000 CFL
Production (2002-03) : 14,000 Pc / day
Sales Turnover (2002-03) : INR Rs. 900 Million (US$ 20 Million)
Exports
: INR Rs. 150 Million (US$ 3.33 Million)
Conformity to Standards : Indian Standards, ZEC, CE
Compliance to ISO : Yes
Foreign Collaboration : No
Manpower Total (Nos.) : 950
Raw Materials / Equipment Used : Main
Glass Tube, Exhaust Tube, Bead Glass Tube, Filament, Lead
in wire, Emitter Powder, Phosphor Powder, PEO Binder,
D.M. Water, Mercury, Argon Gas, Fuel and Gases, Diac,
CDIL, Resistor Carbon Film, Resister Wire Wound, Electrolytic
Cap. DIODE, Cap. Polyester Film,
Bobbin, Ferrite Core, Flexible Copper Wire, Plastic Housing
Top & Bottom, Aluminum Cap, Cement, Packing
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project Features
Project
: CFL Manufacturing Plant
Capacity per Day :
20,000 Pcs
Land Requirements : 5000 Sq. M
Building Requirements : 2500 Sq. M.
Plant
& Machinery and : Approx. cost US$ 0.5 Million
Electrical Installation : 125 KW
Implementation Period : 12-18 Months
Manpower Required : 75
Raw Materials / Equipment
: Main Glass Tube, Exhaust Tube, Bead Glass
Tube, Filament, Lead in wire, Emitter Powder, Phosphor
Powder, ALONC, PEO Binder, D.M. Water, Mercury, Argon
Gas, Fuel and Gases, Diac, CDIL, Resistor Carbon Film,
Resister Wire Wound, Electrolytic Cap. DIODE,
Cap. Polyester Film, Bobbine, Ferrite Core, Ferrite
Core, Flexible Copper Wire, Plastic Housing Top &
Bottom, Al Cap, Cement, Packing
Total Project Cost : US$ 1.25 Million (excluding land & building)
Expected Annual Sales : US$ 2.0 Million
Profitability : 20%
Form of Offer
: Turnkey Project
TOPG
SECTOR
– ELECTRICALS
4. Miniature Circuit
Breakers (MCBs)
1.
Technology Description
Miniature Circuit Breakers
(MCBs) are thermal / magnetic circuit breakers having a
High Fault Breaking Capacity, Current Limiting Design, Trip
Free Ultra Fast Mechanism.
The thermal operation is designed for inverse time
current characteristic for overload protection.
Thermal operation is
achieved with Bimetallic Strip, which deflects when heated
by over currents flowing through it, in doing so, it releases
the latch mechanism and causes the contacts to open.
In magnetic operation, the rising
current energies the solenoid operating the plungers to
strike the trap level causing immediate release of the latch
mechanism.
2.
Technology / Product
Status
The company is in production
for last 20 years. The
company’s pursuing excellence backed by extensive In house
R&D, technical and commercial efforts have resulted
in bringing world class products. The products enjoy good reputation in Australia,
New Zealand,
South African Countries, Middle East,
Indonesia
& Thailand
etc.
3.
Company Profile
Company
Name
: M/s. INDO ASIAN FUSEGEAR LIMITED
Address : A-39 Hosiery Complex,
Phase II Extn., Noida-201305, U.P.
Tel. : 95120-2568472, 2568093-98
Fax : 95120-2568473
Contact Person :
Mr. Vinay Mahendru,
Executive
Director
E-mail
: ecolite@indoasian.com
Web Site : www.indoasian.com
Year of Establishment : 1984
Product(s)
Manufactured
: 1. Switchgears 2. Lighting Products
Installed
Capacity per Annum
: 15,000,000 MCBs
Production (2002-03) : 10,500,000 MCBs
Sales Turnover (2002-03) : INR Rs. 900 Million (US$ 20 Million)
Exports
: INR Rs. 150 Million (US$ 3.33 Million)
Conformity to Standards : Indian Standards
Compliance to ISO : Yes
Foreign Collaboration : No
Manpower Total (Nos.) : 950
Raw Materials / Equipment Used : Housing
Parts Made of Flame Retardant High Strength Glass Reinforced
Thermoplastic Material, Contacts, Silver Graphite Contact
Tips, Solenoids, Bimetal Strips, Springs Hardware etc.
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project Features
Project
: Miniature Circuit Breakers Manufacturing
Plant
Capacity per Annum : 1,00,000 Pc
Land Requirements : 1000 Sq. M
Building Requirements : 800 Sq. M
Plant
& Machinery and : Approx. cost US$ 0.1 Million
Electrical Installation
: 25 KW
Implementation Period : 6 Months
Manpower Required : 20
Raw Materials / Equipment
: Housing Parts Made of Flame Retardant High
Strength Glass Reinforced
Thermoplastic Material, Contacts, Silver Graphic Contact
Tips, Solenoids, Limited
Strips Springs, Hard Work etc.
Total Project Cost : US$ 0.2 Million (excluding land & building)
Expected Annual Sales : US$ 0.5 Million
Profitability : 25%
Form of Offer
: Turnkey Project
TOPG
SECTOR – ELECTRICALS
5. Low Tension Electrical
Switchboards and Bus Ducts
1.
Technology Description
Electrical Switchboards
and Bus Ducts are required in power houses, sub-stations,
steel, textile, paper mills etc. & commercial complex,
large building, etc. for running and distribution of Electric
Power to all the necessary Electric Motors, Central Air
Conditioning Plants, Lightning etc.
The Company excels in
design and making switchboards using sheet metal, painting,
assembly of bought out components, Bus Bar fixing and wiring.
The bought out components include air circuit breakers,
moulded circuit breaker, contactors, switch fuse, meters
etc. of desired make.
The processes used are
shearing, bending, notching in machine shop. The powder coating plant includes Acid pre-treatment
tanks, powder coating booth and ovens.
Also special busbar bending and punching machines
are required for Bus Bar connections.
Assembly, Testing shops, store and office with CAD
facility are required.
2.
Technology / Product
Status
The Electrical Switchboards
of the company have been used by some well known Companies
like Pepsi Food, Coca Cola, Timex Watches, S.T. Microelectronics,
Hero Honda, Jindal Steels etc. for last 12 years.
3.
Company Profile
Company Name
: M/s. MILESTONES SWITCHGEARS PVT. LTD.
Address : 97, Udyog Vihar,
Phase - I, Gurgaon - 16, Haryana.
Tel. : 95124-5002970, 71, 73
Fax : 95124-5002972
Contact Person :
Mr. Gautam Aggarwal, Director
E-mail
: switchgears@vsnl.net
Web Site : www.milestonesindia.com
Year of Establishment : 1992
Product(s) Manufactured : Electric Distribution Panels, Electrical Switchboards, Bus Ducts,
Control Panels etc.
Installed
Capacity per Annum
: 500 Bays
Production
(2003-04)
: 700 Bays
Sales Turnover (2003-04) : INR Rs. 120 Million (US$ 2.5 Million)
Exports
: US$ 40000
Conformity to Standards : Indian Standards
Compliance to ISO : Yes
Foreign Collaboration : No
Manpower Total (Nos.) : 100
Raw Materials / Equipment Used : M.S.
Sheet Metal, Aluminium, Copper, Paint & boughtout
components, Circuit Breakers, MCCB, MCB, Contactors &
Overload Relays etc.
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project Features
Project
: To manufacture customized Electrical Distribution
Panels
Capacity per Annum : 500 Units, each unit of size 600 x 800 x
2300 mm
Land Requirements : 2000 Sq. Mtr.
Building Requirements : 1500 Sq. Mtr.
Plant & Machinery and : Shearing & Bending Machines, Power Presses,
Powder Coating Equipment, Welding Set & Accessories,
Gas Cutting Tools, Air Compressors, Drill Machines, Relay
Tester, Earth Tester, Phase Sequence Meter etc.
Electrical Installation : 100 KW
Implementation Period : 12 Months
Manpower Required : 80
Raw Materials / Equipment
: M.S. Sheet Metal, Aluminium, Copper, Switches,
Contactors, etc.
Total Project Cost : US$ 0.35 Million (excluding land & building)
Expected Annual Sales : US$ 3.0 Million
Profitability : 20%
Form of Offer
: Turnkey Project
TOPG
SECTOR – LIGHT ENGINEERING
6. Soya Milk Powder
& Tofu Manufacturing Plant
1.
Technology Description
Soya Milk and its related
products, like Tofu-Cheese made out of Soya Milk-are getting
popularized throughout the world due to their nutritional
and medicinal qualities.
Soya Milk is high in protein and low in fat and carbohydrates
and also contains no cholesterol and hence excellent food
for children, elderly people and lactating women etc.
The plants are designed
in many models which can produce from 35 litres of Soya
Milk every hour (from 4 kg of Soya Beans) to 5000 litres
per hour.
The company also manufactures
suitable multistage evaporator and spray drying plants to
convert Soya into instant milk powder of international quality
with around 4% of moisture content.
2.
Technology / Product
Status
The company is in operation
for last 27 years. The
Soya Milk Powder & Tofu Plant made by the company are
in use throughout India
and enjoy very good reputation.
The major customers include Khetan International
Products, Decora Tubes Ltd., Baba Food Products, Chetran
Aquaculture Pvt. Ltd., Guru Nanak
Soya Products etc. The
company has exported plants to USA,
Mexico,
Canada,
Iran,
Tanzania,
Qatar,
Russia,
Pakistan,
Cyprus,
Uganda etc.
3.
Company Profile
Company Name
: M/s. SSP (Pvt.) LIMITED
Address : 13 Miles Stones, Mathura Road,
Faridabad – 121003, Haryana.
Tel. : 95129-2270821, 2275968
Fax : 95129-26847665, 2277441
Contact Person :
Mr. T. Chatterjee, Managing Director
E-mail
: sspindia@vsnl.com
Web Site : www.sspindia.com
Year of Establishment : 1977
Product(s) Manufactured : The Company manufactures many types of processing plants for
a variety of sectors :-
1. Dairy Industry
2. Food Processing Industry
3. Fruit & Vegetable Industry
4. Industrial Evaporators
5. Industrial Dryers
6. Chemical Industry :
Detergent Powder Plant
7. Effluent Treatment Plant to Provide Zero
Discharge System
8. Steam Jet Ejector & Hydro Cyclone
Installed
Capacity per Annum
: Not Applicable
Production (2002-03) : Commissioned 50 Plants of different varieties
Sales Turnover (2002-03) : INR Rs. 160 Million (US$ 3.5 Million)
Exports
: INR Rs. 62.4 Million (US$ 1.3 Million)
Conformity to Standards : Indian Standards
Compliance to ISO : Yes
Foreign Collaboration : No
Manpower Total (Nos.) : 250
Raw Materials / Equipment
Used : Motors, Air Compressors, Pressure Vessels, Panel Meters, Pipes
etc.
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project Features
Project
: Soya Milk Powder / Tofu Manufacturing Plants
Capacity per Annum : 100 Plants of 200 litres per hour of Soya
Milk Powder Output Capacity
Land Requirements : 500 Sq. Mtr.
Building Requirements : 2000 Sq. Mtr.
Plant, Machinery and
Test Equipment
: US$
1.0 Million
Electrical Installation : 85 KW
Implementation Period
: 9 Months
Manpower Required
: 12 persons / shift
Raw
Materials / Equipment
Required
: Soya Beans @ 30 kg / h
Total Project Cost
: US$ 1.035 Million (excluding land &
building)
Expected Annual Sales
: US$ 2.40 Million
Profitability
: 20%
Form of Offer : Turnkey Project
TOPG
SECTOR – LIGHT ENGINEERING
7. Hydraulic Presses
for Scrap Baling & for Rubber & Composite Material
Moulded Parts
1.
Technology Description
Hydraulic
Presses are presently used for wide applications i.e. Scrap
Baling, Deep Drawing, Compression Moulding, Bending, Power
Compacting etc.
‘SANTEC’
offers technology to produce Hydraulic Scrap Baling Presses
& Compression Moulding Presses or the complete assembled
machines to the customers. The Scrap Baling Presses are generally used
to make Bundles/Bales of ferrous or non-ferrous Scrap material
i.e. Coil, Agricultural mixed herbs, Paper waste, Carton
Boxes, Garbage, Cotton & Silk waste apart from all metallic
Scraps. The density
of these bales is high, so that they are convenient to store
& transport.
The compression
moulding presses are used to produce various Rubber parts
used in automobiles & other industries, viz. Electrical
parts and Composite materials etc. These presses have arrangements to provide required
heat & force to mould the parts of different polymers.
2.
Technology / Product
Status
The products manufactured
are being marketed all over India
since 1996 and exported for the last 4 years to UK,
France,
Sri Lanka,
Bangladesh,
Egypt,
Saudi Arabia,
Indonesia & Vietnam etc. These machines have very good demand all over
the world.
3.
Company Profile
|
Company Name
|
:
|
SANTEC HYDROFLUID ENGINEERS
|
|
Address
|
:
|
GD-96, Vishakha
Enclave,
Pitam Pura,
Delhi – 110 088
Tel. : +91-11-27311039,27312642
Fax : +91-11-27316436
|
|
Contact Person
|
:
|
Mr. U.K. Sangal, Director
|
|
E-mail
|
:
|
santec@bol.net.in & santec@hotpop.com
|
|
Web Site
|
:
|
www.santecindia.com & www.santec.trade-india.com
|
|
Year of Establishment
|
:
|
1996
|
|
Product(s) Manufactured
|
:
|
1.
Hydraulic
Presses for all industrial applications i.e.
Deep Drawing, Power Compacting.
2.
Scrap
Baling Presses.
3.
Compression
Moulding Presses for Rubber, Bakelite, S.M.C., FRP,
Plyboard, Electrical Parts etc.
4.
Turn
key plant machinery for stainless steel sink, Gas
Stoves.
5.
Turn
key plant machinery for Rubber Products.
6.
Palletizing line for Plastic Granules.
|
|
Installed Capacity
|
:
|
150 – 300 machines (approx.)
These are made to order based upon customer’s requirements,
designs and use
|
|
Production (2002-03)
|
:
|
150 machines
|
|
Sales Turnover (2002-03)
(2003-04)
|
:
|
INR Rs. 25 Million (US$ 0.56 Million)
INR Rs. 50 Million (US$ 1.1 Million)
|
|
Exports
|
:
|
INR Rs. 35 Million [US$ 0.78 Million]
|
|
Conformity to Standards
|
:
|
Indian Standards
|
|
Compliance to ISO
|
:
|
-
|
|
Foreign Collaboration
|
:
|
-
|
|
Manpower Total (Nos.)
|
:
|
40
|
|
Raw Materials
/ Equipment Used
|
:
|
Using custom built prefabricated, bought-out material and
assembling the sub-components to form the desired
model as per customers’ needs. Pre-Fabricated Steel
Parts (Cabinets, Mounting Brackets), Seamless Pipes,
M.S. Plates in various thickness, Hydraulic Pumps,
Electrical Components, Motors, Switching Panels, Thermoplastics
hoses etc.
|
|
Effluent Generated
|
:
|
Nil
|
4.
Broad Profile of Project Offer
|
Project Features
|
Project I
Scrap Baling Presses
Mfg. Plant
|
Project II
Compression Moulding
Presses
Mfg. Plant
|
|
Capacity per Annum
|
100 Nos.
|
100 Nos.
|
|
Land Requirements
|
2000 Sq. Mtr.
|
2000 Sq. Mtr.
|
|
Building Requirements
|
500 Sq. Mtr.
|
500 Sq. Mtr.
|
|
Plant & Machinery
and Test Equipment
|
US$ 1 Million
|
US$ 1 Million
|
|
Electrical Installation
|
100 KVA
|
100 KVA
|
|
Implementation Period
|
1 Year
|
1 Year
|
|
Manpower Required
|
50-60
|
50-80
|
|
Raw Materials / Equipment Required
|
Steel in difference forms & sizes, Electrical Motors, Pumps, Thermoplastic
Hoses etc.
|
Steel in difference forms & sizes, Electrical Motors, Pumps, Thermoplastic
Hoses etc.
|
|
Total Project Cost
|
US$ 2.00 Million (excluding land & building)
|
US$ 1.8 Million (excluding land & building)
|
|
Expected Annual Sales
|
US$ 2.5 Million
|
US$ 2.00 Million
|
|
Profitability
|
20%
|
20%
|
|
Form of Offer
|
Turnkey Project
|
Turnkey Project
|
TOPG
SECTOR – LIGHT ENGINEERING
8. Precision Cylindrical
Grinding Machines
1.
Technology Description
The state
of the art hydraulic and CNC precision cylindrical grinding
machines are the essential requirements for all Bearings,
Automobile, Electrical and Light Engineering Industries.
The machines are highly
flexible and have tremendous applications for either mass
production or small batch due to quick set up changeover
and versatility of CNC dressing.
The machines are available in external, internal
or universal versions. Diamond
size control provides effortless repetitive grinding under
high cutting speed conditions. In
addition, automatic wheel dressing cycle, including wheel
wear compensation, reduces the need for operator skill and
attention.
2.
Technology / Product
Status
The company is in operation
for last 8 years. Company
is one of the leading manufacturers of concord conventional
cylindrical grinding machines.
These machines are greatly in use in India,
in bearing and auto parts manufacturing companies to their
entire satisfaction. Some
of the prominent users are ARB Bearings Ltd., Bill Forge
Pvt. Ltd., Goetze India Ltd., Shriram Pistons and Rings
Ltd., Tata Steels and MICO etc.
3.
Company Profile
Company
Name
: M/s. SRB MACHINES PVT. LTD.
Address : 59/2/1, Site IV, Industrial Area,
Sahibabad, Ghaziabad (U.P.) – 201010
Tel. : +91-95120-2895760
Fax : +91-95120-2895723
Contact Person : Mr. Surendra Goel, Director
E-mail : srbmachines@satyam.net.in
Web Site : www.srbmachines.com
Year of Establishment : 1996
Product(s) Manufactured
: Precision Cylindrical Grinding Machines
(CNC & Hydraulic Versions)
Installed Capacity per Annum
: 150 Machines
Production (2002-03) : 45
Sales Turnover (2002-03)
: INR Rs. 20 Million (US$ 0.44 Million)
Exports : -
Conformity to Standards
: Indian Standards
Compliance to ISO : Yes
Foreign Collaboration : No
Manpower Total (Nos.) : 48
Raw Materials / Equipment Used : Motors,
Gears, Electrical Switching Panels, Castings and CNC Systems
Effluent
Generated
: Nil
4.
Broad Profile of Project Offer
Project
Features
Project
: Manufacturing Plant for Precision Cylindrical
Grinding Machines
Capacity per Annum : 50 Machines of Various Sizes to Suit Industrial
Needs
Land Requirements : 1,250 Sq. Mtr.
Building Requirements : 1,000 Sq. Mtr.
Plant
& Machinery and : Planer, Shaper, Horizontal
Boring Machine, Lathes, Cylindrical
Grinding Machine, Milling Machine, Surface Grinder, Drill
Machines, Power Hacksaw, Sheet Cutter and Bending Machine,
Welding Set, Radial Drill Machine, Bench Vices, Measuring
Equipments, Surface Testing Machine, Hardness Testing
Machine, etc.
Electrical Installation : 50 KW
Implementation Period : 9-12 Months
Manpower Required : 25
Raw Materials / Equipment :
Motors, Gears, Electrical Switching Panels, Castings
and CNC Systems Required
Total Project Cost : US$ 0.20 Million (excluding land & building)
Expected Annual Sales : US$ 0.50 Million
Profitability : 25%
Form of Offer
: Turnkey Project
Note : For manufacture of these grinding machines graded
castings and heat treatment facilities are required. It has been assumed that these facilities will
be available in the country of manufacture.
TOPG
SECTOR – LIGHT ENGINEERING
9. Automatic Plastic Injection Moulding Machines
1.
Technology Description
Plastic Injection Moulding
Machines are extensively used for the production of Plastic
Bottles, Buckets and Other Plastic Products.
The machines have extensive network of hydraulic
control for the processing of raw plastic, the die opening
& closing operations and delivery of finished products.
The melting of raw plastic is carried out by electrical
heating system from where the molten plastic is fed into
the die for forming of plastic product.
Finally the hot die is cooled by water circulation
around die to achieve solid plastic product which is ejected
out from die after die opening delivers the product in the
output basket. This
technology is very useful for developing countries, since
being lost cost product.
Further, plastic utensils, bottles etc. have good
demand.
2.
Technology / Product
Status
These Thermo Plastic
Injection Moulding Machines are being used extensively in
the Indian Small Scale Industries to their entire satisfaction
for last 20 years. The machines have low mean time between failures.
The clients include ADR Plastics Ltd., Gold Plastic Ltd.,
Bhalla International etc.
3.
Company Profile
Company
Name
: M/s. VISHAVAKARMA HYDRAULIC MACHINES
Address : 29/16, Gali No. 6,
Anand Parbat Indl. Area, New Delhi-110005
Tel. : 91-11-25755235, 25867077
Fax : 91-11- 25754363
Contact Person :
Mr. Balbir Singh Rana, Proprietor
E-mail
: vishava@vishavakarma.com
Web Site : -
Year of Establishment : 1980
Product(s)
Manufactured
: Fully & Semi Automatic Plastic Injection
Moulding Machines in Various Sizes & Capacities
Installed
Capacity per Annum
: 100 Machines
Production (2002-03) : 40 Machines
Sales
Turnover (2002-03)
: INR Rs. 10 Million (US$ 0.22 Million)
Exports
: -
Conformity to Standards : Indian Standards
Compliance to ISO : No
Foreign Collaboration : Nil
Manpower Total (Nos.) : 35
Raw Materials / Equipment
: Metal Casted and Pressed Parts, Motors,
Heaters, Air Compressors, Electrical
Contactors & Relays, PLC Micro Processor Control Panels
etc.
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project Features
Project
: Manufacturing Plant for Automatic Plastic
Injection Moulding Machines
Capacity per Annum : 100 Machines
Land Requirements : 500 Sq. Mtr.
Building Requirements : 300 Sq. Mtr.
Plant & Machinery and : US$ 0.1 Million
Electrical Installation
: 50 KW
Implementation Period : 12 Months
Manpower Required : 30
Raw Materials / Equipment
: Metal Casted and Pressed Parts, Motors,
Heaters, Air Compressors, Electrical Contactors &
Relays, PLC Micro Processor Control Panels etc.
Total Project Cost : US$ 0.2 Million (excluding land & building)
Expected Annual Sales : US$ 0.3 Million
Profitability : 20%
Form of Offer
: Turnkey Project
TOPG
SECTOR – LIGHT ENGINEERING
10. Submersible Pumps
1.
Technology Description
Submersible Pumps are
used to lift water from deep wells.
The pumps are submersed in the liquid / water being
lifted. Since their operation is under water, special insulation
/ protection is provided to safeguard
the motor and electricals to avoid short circuiting. The water being pumped is discharged through
the column pipe and brought over / delivered at the ground
level. This technology is useful in countries of Middle
East etc. where water availability is deep underground.
2.
Technology / Product
Status
The company is in operation
for last 14 years. Submersible
Pumps manufactured by the company are being used throughout
India
and have been designed to withstand extreme climate conditions
of Indian Subcontinent.
3.
Company Profile
Company
Name
: M/s. OSWAL ELECTRICALS (PUMPS)
Address : 71/3, Milestone, G.T. Road,
Delhi Side, Karnal-Haryana - 132001.
Tel. : 0184-2221502/1503/1504/1505
Fax : 0184-2221501
Contact Person :
Mr. Vivek Gupta, Managing Director
E-mail
: contact@oswalpumps.com
Web Site : www.oswalpumps.com
Year of Establishment : 1990
Product(s) Manufactured : Electric Motors; Mono Bloc Pumps and Submersible Pumps
Installed Capacity per Annum : 0.1 Million
Pcs
Production (2002-03) : 0.08 Million Pcs
Sales Turnover (2002-03) : INR Rs. 165 Million (US$ 3.6 Million)
Exports
: -
Conformity to Standards : Indian Standards
Compliance to ISO : Yes
Foreign Collaboration : Nil
Manpower Total (Nos.) : 78
Raw Materials / Equipment Used : Electrical
Lamination, Copper Winding Wires, Iron Castings, Ball
Bearings, Rubber Seals, Connection Blocks, Electric Capacitors
etc.
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project
Features
Project
: Submersible Pumps Manufacturing Plant
Capacity per Annum : 0.1 Million Pcs
Land Requirements : 1000 Sq. Mtr.
Building Requirements : 600 Sq. Mtr.
Plant
& Machinery and : US$ 0.2 Million
Electrical Installation : 50 KW
Implementation Period : 9-12 Months
Manpower Required : 40
Raw Materials / Equipment
: Electrical Lamination, Copper Winding Wires,
Iron Castings, Ball Bearings,
Rubber Seals, Connection Blocks, Electric Capacitors etc.
Total Project Cost : US$ 0.4 Million (excluding land & building)
Expected Annual Sales : US$ 0.6 Million
Profitability : 25%
Form of Offer
: Turnkey Project
TOPG
SECTOR – LIGHT ENGINEERING
11. Medical Heating Pads
1.
Technology Description
The heating pads give
instant heat by simple flexing a disc provided in the pad. It helps to provide instant relief from Body
aches, stiffness & swelling and can be designed as per
requirement and shaped as per different parts of body need.
The pads can be wrapped in the effected parts and
has no side effect like other heat pads i.e. Electrical
etc. These pads do
not require any external source of heat like Electricity,
Battery & Hot Water and provide instant heat up to 52
degree Celcius for a duration varying from 30 minutes to
3 hours depending on size and environmental conditions.
The product is permanently sealed and can be used
hundred number of times again and
again.
2.
Technology / Product
Status
Heating pads using this
technology are being used satisfactorily in various hospitals
in varying degrees of climate temperatures from -50C
to 280C for last 4 years. Indian Army Hospitals
have also found the products to be useful.
3.
Company Profile
Company
Name
: M/s. SENSO MEDI SYSTEMS
Address : B-14/3, Okhla Industrial Area,
Phase - II, New Delhi-110020
Tel. : 91-11- 26388905
Fax : 91-11- 26386177
Contact Person :
Mr. Dinesh Kr. Gupta,
CEO
E-mail
: sensomed@vsnl.net
Web Site : www.senso-med.com
Year of Establishment : 2000
Product(s)
Manufactured
: 1. Disposable
& Reusable Medical Disposable Heating Pads.
2. Breast Cancer
Detection Gloves for Women.
3. Other
Small Electronic Gadgets.
Installed
Capacity Per Annum
: 2,50,000 Pcs
Production (2002-03) : 50,000 Pcs
Sales Turnover (2002-03) : INR Rs. 4.5 Million (US$ 0.1 Million)
Exports
: The company now
wishes to enter export market.
Conformity to Standards : Indian Standards
Compliance to ISO : In Process
Foreign Collaboration : No
Manpower Total (Nos.) : 30
Raw Materials / Equipment Used : Special
Rubber Sheets, Poly Bags, Specialty Chemicals for Instant & Rechargeable
Heating Packing Material
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project
Features
Project
: To Manufacture Medical Heating Pads
Capacity per Annum : 2,50,000 Pcs for
3” x 4” size
1,00,000 Pcs for 5” x 7” size
50,000 Pcs for 8” x 10” size
Other sizes as per requirements, can also be made
with the same machinery
Land Requirements : 200 Sq. Mtr.
Building Requirements : 100 Sq. Mtr.
Plant
& Machinery
: US$
0.01 Million
Electrical Installation : 10 KW
Implementation Period : 6 Months
Manpower Required : 10
Raw Materials/ Equipment
: Special Rubber Sheets, Poly Bags, Specialty Chemicals
for Instant & Rechargeable Heating Packing Material
Total Project Cost : US$ 0.25 Million (excluding land & building)
Expected Annual Sales : US$ 0.4 Million
Profitability : 30%
Form of Offer : Turnkey Project
TOPG
SECTOR – LIGHT ENGINEERING
12. Precision Machined Components for Various Industrial Applications
1.
Technology Description
A wide range of Steering
and Suspension Parts and Industrial Engineering Components
made from Forgings, Sand Castings and Investment Castings
are manufactured for wide applications in Automotive Industry,
Material Handling Systems, Machine Tools Industry, Earth
Moving Equipment, Electrical Transmission and Computer Hardware
Industry.
The components are manufactured
after computer aided contemporary design technology on high
precision CNC & conventional machines and tools. The tools are periodically appraised for calibration
for closer tolerances. The
products are tested for many critical tests e.g. salt spray
test and universal tensile strength test.
2.
Technology / Product
Status
The company is a 100%
export oriented unit and is in operation for last 10 years
& is a recipient of outstanding Export Award presented
by the Engineering Export Promotion Council of India.
The products of the company are already in extensive
use in USA,
Canada,
Australia
and France etc. as OEM manufacturers meeting international
standards in manufacturing and quality.
The major customers are Borg Warner, GE Westinghouse,
John Deere, Hyundai, International Harvestor etc.
3.
Company Profile
Company Name
: M/s. SUNRISE AUTOMOTIVE LTD. (FORMERLY SUNRISE
TRANSMISSIONS LTD.)
Address
: 45th Mile Stone, Naurangpur, Delhi Jaipur Highway
Gurgaon - 122001, Haryana.
Tel. : 95124-2378776/766/726
Fax : 95124-2378776
Contact Person :
Mr.Sudhir Vaishnavi, Managing Director
E-mail : sunrisegroup@vsnl.com
Web Site : www.sunrisegroup-engineering.com
Year of
Establishment
: 1994
Product(s)
Manufactured : 1. Steering
& Suspension Parts :Ball Joints, Centre Links, Clamp
Sleeves, Drag
Links / Track Rods, Idler Arms, Pitman Arms, King Pins,
Fulcrum Pins, Rack
Ends / Tie Rods, Tie Rod Ends, Track Control Arm Industrial
Engineering
Components : Clutch & Brake Components, Earth Moving
Equipment Parts,
Trailer Suspension Parts, Electrical Transmissions Components,
Conveyor
Belt Components.
Installed
Capacity per Annum
: Steering & Suspension Parts : 2,000,000 Pcs
Industrial
Engineering Components : 5,000,000
Pcs (Machined forged /
Production (2002-03)
: 1,792,830 Parts & Components
Sales Turnover (2002-03)
: INR Rs. 153 Million (US$ 3.4 Million)
Exports
: INR Rs. 153 Million (US$ 3.4 Million)
Conformity to Standards
: Indian Standards & APQP (FMEA, PDAD)
Standards
Compliance to ISO
: Yes
Foreign Collaboration
: 25% Equity Participation of UCA Group, USA
Manpower Total (Nos.)
: 250
Raw Materials / Equipment Used : Carbon
Steel, Alloy Steel, Stainless Steel, Paints
& Rubber Components, Investment Castings etc.
Effluent Generated : Nil
4.
Broad Profile of Project
Offer
Project Features
Project : To Manufacture Machined Components, Steering
and Suspension Parts for Automobiles
Capacity
per Annum
: Steering & Suspension Parts : 2,000,000 Pcs
Land Requirements
: 10000 Sq. Mtr.
Building Requirements
: 6000 Sq. Mtr.
Plant &
Machinery
: Casting & Forging Equipment, Tool Room
Machines, Power Presses, CNC & Conventional Precision
Machines, Induction Hardening & Welding Equipment,
Deburring Equipment ; Rockwell Hardness Testing Equipment,
Universal Tensile Testing Equipment, Profile Projector,
Salt Spray Tester, Digital & Axial Torque Testers,
Endurance Testing Equipments, Verniers, Guages, Micrometers
of different types etc.
Electrical
Installation
: 200 KW
Implementation
Period
: 18 Months
Manpower
Required
: 60
Raw Materials
/ Equipment
: Carbon Steel, Alloy Steel, Stainless Steel,
Paints & Rubber Components etc.
Required
Total Project
Cost
: US$ 0.3 Million (excluding
land & building)
Expected
Annual Sales
: US$ 0.3 Million
Profitability : 20%
Form of Offer : Turnkey Project
TOPG
SECTOR – LIGHT ENGINEERING
13. Precision Sheet Metal
Components for Two & Four Wheelers
1.
Technology Description
Precision sheet metal
components are primarily made by blanking on advanced power
presses of 5-1000 tonnes capacity which assure high accuracy
and tool life. The tools are designed in house on CAD / CAM.
The blanked components
are put to various secondary operations to meet diverse
customer needs such as all types of Welding, CAC Pipe Bending,
Powder Coating, Heat Treatment etc.
Engineering, Production
and Quality Control Departments coordinate to guarantee
and maintain the highest quality levels.
Process controls assure quality from prototype through
production.
2.
Technology / Product
Status
The company is in operation
for last 30 years. The
company is core vendor of sheet metal components for Maruti
Udyog, Yamaha Motors, Honda Scooters, Daewoo Motors and
New Holland India.
3.
Company Profile
Company
Name
: M/s. INDO INDUSTRIAL ENGINEERS
Address : Plot No. 334-338, Sector-24,
Faridabad, Haryana.
Tel. : 95129 - 5022333, 5028209-213
Fax : 95129 - 5025352
Contact Person :
Mr. Anand Jain, Partner
E-mail
: indoindl@now-india.net.in
Web Site : www.indoindustrial.com
Year of Establishment : 1974
Product(s)
Manufactured
: Precision Sheet Metal Parts & Sub Assemblies
of Two & Four Wheelers
Installed
Capacity
: 1,000,000 Pcs
Production (2002-03) : 800,000 Pcs
Sales Turnover (2002-03) : INR Rs. 126 Million (US$ 2.8 Million)
Exports
: No Direct Exports
Conformity to Standards : Indian Standards
Compliance to ISO : Yes
Foreign Collaboration : No
Manpower Total (Nos.) : 70
Raw Materials / Equipment Used : Galvanized
Iron, CRC Hot Rolled and Aluminum Sheets in Various Sizes
& Varieties
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project
Features
Project
: Manufacturing Plant for Precision Sheet
Metal Parts & Sub Assemblies for Two & Four Wheelers
Capacity per Annum : 1 Million Pcs of different sizes
Land Requirements : 1000 Sq. Mtr.
Building Requirements : 700 Sq. Mtr.
Plant & Machinery and : Fine
Blanking Power Presses 400 tons, Power Presses 160 tons,
Power Presses, Heavy Duty Shearing Machines, Deburring
Machines, CNC Pipe Bending Machine, Copy Milling Machines,
Heavy Duty Surface Grinder, Milling Machines, Lathes,
Nibbling Machines, Radial Drilling Machines, Projection
Welding, Mig Welding, Tig Welding etc.
Electrical Installation : 100 KW
Implementation Period : 12 Months
Manpower Required : 25
Raw Materials / Equipment
: Galvanized Iron, CRC Hot Rolled and Aluminum
Sheets in Various Required
Sizes & Varieties
Total Project Cost : US$ 0.1 Million (excluding land & building)
Expected Annual Sales : US$ 0.5 Million
Profitability : 20%
Form of Offer
: Turnkey Project
TOPG
SECTOR-LIGHT ENGINEERING
14. Solvent Extraction
Plants/Edible Oil Refineries
1.
Technology Description
Extraction of oil from oilseeds is a complex process comprising
of preparatory section, extraction section, conditioning
section, distillation and recuperation section. The by-products
i.e. deoiled cakes is an excellent
ingredient for cattle and poultry feed manufacturing. The
solvent extraction plants feature continuous operations.
Low oil residue in extracted meal, low power and steam consumption
& low solvent losses etc. The company has recently
won the National Award 2004 instituted by the Ministry of
Science & Technology, Government of India for its innovative
technologies.
A large number of innovations make Mecpro’s
Solvent Extraction Plant the best choice. These reduce operating
cost, increase the efficiency of the plant and have environment
friendly features. They include patent innovations like Vent-air
purification system, Low temperature separation of hexane
from miscella, Special filter media to reduce impurities
and volatiles, Waste
Water recycling system and Desolventization
he refined oils are obtained by expression and/or Solvent Extraction
of oil bearing materials along with oil a lot of unwanted
components are also extracted. Among these components most
common impurities are, Free Fatty Acid content, phosphatides,
colouring pigments, odoriferous material along with moisture
and suspended solids. Most of these impurities are harmful
for human consumption and hence need removal from oil.
The company has designed & developed process technologies
for efficient twin bleaching system which reduces the bleaching
earth consumption by 30% besides innovative deodorisation
system which processes oil at low temperature thus retaining
micronutrients and antioxidants which are good for the human
body.
Mecpro has conducted research for years to come up with new
technologies that improve the efficiency and reduce the
operating cost of the refinery.
The most important innovations are Enzymatic Degumming,
Simultaneous Degumming, Twin Bleaching, Gravitational Dewaxing
& Winterization and Efficient Deacidification &
Deodorization
2.
Technology/Products Status
The company is in operation for last 18 years. More than 85
turnkey plants designed and commissioned by the company
are in operation throughout India as well as overseas. Major clients
include National Dairy Development Board, Blue Star Ltd.,
Tata Oil Mills Ltd., Indian Oil Corporation Ltd., Oswal
Group, Thapar Group, South Baghdad Power Plant, Iraq &
Sibahi & Dahrog, Syria. Technologies were patented in 2001
with the support of National Research and Development Corporation
and Department of Scientific & Industrial Research,
Government of India. The technologies have been commercialised
satisfactorily in the industry.
3.
Company Profile
|
Company Name
|
:
|
MECPRO HEAVY ENGINEERING
LTD.
|
|
Address
|
:
|
610/9, Som Datt Chambers-II
Bhikaji Cama Place, New Delhi – 110 066
Tel: 91-11-26194474, 26100912, 26181387
Fax: 91-11-26185182
|
|
Contact person
|
:
|
Mr. Rajiv Arora, Executive Director
|
|
E-mail
|
:
|
mhel610@bol.net.in
|
|
Web Site
|
:
|
www.mecpro.com
|
|
Year of Establishment
|
:
|
1986
|
|
Product(s) Manufactured
|
:
|
Technology providers and turnkey plant and machinery suppliers
of oils & fats & oleochemical plants namely
Solvent Extracted Oils, Vegetable Refined Oils, Vanaspati
Ghee, Industrial Hard Oils, Fatty Acids, Soaps &
Detergents.
|
|
Installed Capacity per annum
|
:
|
Capable of commissioning 50 plants
|
|
Production (2002-03)
|
:
|
Commissioned 20 plants of average 100 TPD
|
|
Sales Turnover (2003-04)
|
:
|
Rs. 100 Million
|
|
Exports (2003-04)
|
:
|
US$ 144000
|
|
Conformity to Standards
|
:
|
Indian Standards & ISO 9000
|
|
Compliance to ISO
|
:
|
ISO 9000
|
|
Foreign Collaboration
|
:
|
No
|
|
Manpower Total (Nos.)
|
:
|
72
|
|
Raw Materials / Equipment used
|
:
|
Stainless steel plates, Mild steel plates, Pumps, Motors,
Gear boxes, Instrumentation
|
|
Effluent Generated
|
:
|
Nil
|
4.
Broad Profile of Project
Offer
| Project Features |
Project I |
Project II |
Project III |
|
Project |
Solvent
Extraction |
Refinery |
Vanaspati |
Minimum
economic
capacity |
100
TPD |
50
TPD |
50
TPD |
| Land Requirements |
12000
Sq. mt. |
8000
Sq. mt. |
16000
Sq. mt. |
| Building
Requirements |
10,000
Sq. mt. |
6,000
Sq. mt. |
12,000
Sq. mt. |
Plant & Machinery and Test
Equipment (FOB) US$ |
600,000 |
800,000 |
12,00,000 |
| Electrical
Installation |
100
KW |
85 KW |
150
KW |
| Implementation
Period |
8 months |
6 months |
10 months |
| Manpower
required |
24 |
18 |
36 |
|
Raw
Materials/
Equipment Required
|
Rice Bran, Sun-flower,
Soybean, Canola, Mustard,
Sesame Coconut, Ground
nut etc. |
Palm Oil, Solvent Extracted
oil |
Blend of Edible Oils |
| Total
Project cost US$ |
800,000 |
10,00,000 |
15,00,000 |
Expected
Annual Sales
US$ |
20,00,000 |
25,00,000 |
34,00,000 |
| Profitability |
30% |
30% |
30% |
| Form
of Offer |
Turnkey
Project |
Turnkey
Project |
Turnkey Project |
TOPG
SECTOR – LIGHT ENGINEERING
15. Carbon Dioxide Gas
1.
Technology Description
Carbon Dioxide gas is
used in various industrial sectors like fast cooling of
Blow Mould Dies, Shock Freezing of Foodstuff, Partial desalination
of water in addition to normal uses like making sodas sizzle
and bears sparkle.
Carbon Dioxide gas up
to 99.9% purity can now be extracted from waste, boiler
or any furnace fuel gas or even biomass waste in addition
to the regular raw material like liquid fuel or coke of
different varieties.
The plants offered manufacture
food grade and 99.9% pure carbon dioxide on 100% pollution
free, cost effective in running and can also co-produce
nitrogen and distilled water.
2.
Technology / Product
Status
The company is in operation
for last 15 years and has been exporting carbon dioxide
manufacturing plants to various Middle East
countries on Turnkey basis under the brand name “GASLAB”.
3.
Company Profile
Company
Name
: M/s. S.S. FOUNDRY CHEMICAL INDUSTRIES (P)
LTD.
Address : A-6 / 3, Jhilmil Industrial Area,
G.T.
Road, Delhi – 110095.
Tel. : 22583963/22583247
Fax : 22592770/22134814
Contact Person :
Dr. S.S. Aggarwal, Managing Director
E-mail
: fcipl@nde.vsnl.net.in
Web Site : www.ssfci.com
Year of Establishment : 1989
Product(s)
Manufactured
: 1. Carbon Dioxide Gas Plants,
2. Nitrous Oxide Gas Plants,
3. Hydrogen Gas Plants,
4.
Storage Tanks & Transportation Tankers,
5. Dry Ice Presses,
6. Other Chemical Gas Plants and
7. Anesthetic Gas Plants
Installed
Capacity per Annum
: 6 Plants
Production (2002-03) : 4 Plants
Sales Turnover (2002-03) : INR Rs. 52 Million (US$ 116,000)
Exports
: INR Rs. 52 Million (US$ 116,000)
Conformity to Standards : Indian & British Standards
Compliance to ISO : Yes
Foreign Collaboration : No
Manpower Total (Nos.) : 8
Raw Materials / Equipment Used : Boilers,
Tanks For Liquid Carbon Dioxide, Compressors, Refrigeration
Systems, Custom Built Drying Systems, Pressure Pipes, Electrical Control
Panels etc.
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project
Features
Project
: Manufacturing Plant for Carbon Dioxide Gas
Capacity per Annum : Up to 1000 kg / Hour
Land Requirements : 1000 Sq. M
Building Requirements : 500 Sq. M
Plant & Machinery and : US$ 3,40,000
Electrical Installation : 100 KW
Implementation Period : 3-4 Months
Manpower Required : 5 per Shift
Raw Materials / Equipment
: Boilers, Tanks For Liquid Carbon Dioxide,
Compressors, Refrigeration Systems,
Custom Built Drying Systems,
Pressure Pipes, Electrical Control Panels etc.
Total Project Cost : US$ 400,000 (excluding land & building)
Expected Annual Sales : US$ 500,000
Profitability : 25%
Form of Offer
: Turnkey Project Offer
Note :1. Distilled Water and
/ or Nitrogen can also be produced as a byproduct of Carbon Dioxide.
2. The
company also provides Turnkey Solutions for other plants
mentioned in “Product(s) manufactured” column. The details
of these turnkey solutions can be obtained from the company.
TOPG
SECTOR
– LIGHT ENGINEERING
16. Refrigeration &
Air-conditioning Compressors
1.
Technology Description
The compressors use
movement of piston in a cylinder via a connecting rod and
crankshaft to compress refrigerants gasses.
Compressed non CFC refrigerated gas in them passed
through throttle valve, cooling and evaporating coil to
achieve lower temperatures required for refrigeration and
air-conditioning purposes.
Specially designed and carefully balanced mechanical
parts, optimized aluminum piston shape and chromium plated
piston rings ensure long life and low running noise and
power consumption.
2.
Technology / Product
Status
The company is in production
for last 20 years and refrigeration and air-conditioning
compressors manufactured by the company are in use throughout
India. The important clients include Mother Dairy,
Delhi Milk Scheme, Coca Cola India, Haldiram Sweet &
Cadbury India etc.
3.
Company Profile
Company
Name
: M/s. SEA BIRD REFRIGERATION
Address : 282, Patparganj Indl. Estate,
Patparganj, Delhi – 110092.
Tel. : 22148267, 22155684
Fax : 22141668
Contact Person :
Mr. Rahul Maini / Mr. Vijay Maini, Director
E-mail
: amoking@vsnl.com
Web Site : www.amoking.com
Year of Establishment : 1983
Product(s)
Manufactured
: Compressor for Refrigeration & Air-conditioning
Equipments and their Parts
Installed
Capacity per Annum
: 2500 Pcs
Production (2002-03) : 1500 Pcs
Sales Turnover (2002-03) : INR Rs. 8.5 Million (US$ 190,000)
Exports
: -
Conformity to Standards : Indian & DIN Standards
Compliance to ISO : -
Foreign Collaboration : No
Manpower Total (Nos.) : 35
Raw
Materials / Equipment Used
: Castings & Forgings of Ferrous and Non
Ferrous Metals,
Bearings, Bushes
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project
Features
Project
: Manufacturing Plant for Refrigeration &
Air-Conditioning Compressors
Capacity per Annum : 2500 Pcs from 0.75 H.P.
to 60 H.P.
Land Requirements : 500 Sq. M
Building Requirements : 300 Sq. M
Plant
& Machinery and : US$ 50,000
Electrical Installation : 50 KW
Implementation Period : 6 Months
Manpower Required : 20
Raw Materials / Equipment :
Castings & Forgings of Ferrous and Non Ferrous
Metals, Bearings, Bushes
Required
Total Project Cost : US$ 0.1 Million (excluding land & building)
Expected Annual Sales : US$ 0.2 Million
Profitability : 20%
Form of Offer : Turnkey Project Offer
Note : The above project cost is for manufacturing
refrigeration and air conditioning compressors on the basis
of manpower intensive technology with limited reliance on
automation.
TOPG
SECTOR – LIGHT ENGINEERING
17. Tractor & Auto
Parts
1.
Technology Description
Various “Tractor and
Auto Components” are manufactured starting from raw forgings,
castings & steel bars which are machined and ground
on latest Special Purpose Machines and measured by Special
Measuring Instruments to control and achieve global standards
of quality.
CNC Turing Centres are
used to achieve cost effectiveness.
The machined components are heat-treated as per requirement
to make certain that the components have enduring strength
and reliability to withstand the most rigorous operating
conditions.
2.
Technology / Product
Status
The company is in operation
for last 44 years. High
quality components are marketed to OEMs in India
and overseas. The
customers include Escorts, Ford, Messey Ferguson, Ashok
Leyland, Greaves, New Holland Tractors, International Tractors,
Carraro India Ltd., Carraro
Spa, Italy
etc.
3.
Company Profile
Company
Name
: M/s. KEW
PRECISION PARTS PVT. LTD.
Address : 41, DLF Industrial Area,
Kirti Nagar, New
Delhi
- 110015.
Tel. : +91-11- 25458789/25458790
Fax : +91-11- 25459372
Contact Person :
Mr. Munish Bhunsali, Director
E-mail
: skew@vsnl.com
Web Site : -
Year of Establishment : 1960
Product(s) Manufactured : Tractor & Automotive Parts
Installed Capacity per Annum : 1,000,000 Pcs
Production (2002-03) : 700,000 Pc
Sales Turnover (2002-03) : INR Rs. 56.1 Million (US$ 1.25 Million)
Exports
: INR 0.9 Million (US$ 0.2 Million)
Conformity to Standards : Indian Standards
Compliance to ISO : -
Foreign Collaboration : No
Manpower Total (Nos.) : 250
Raw Materials / Equipment Used : Steel
Bar, CRCA Sheets, Forgings, Castings
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project
Features
Project
: Manufacturing Plant for Tractor & Auto
Parts
Capacity per Annum : 1,000,000 Pcs of various assortments
Land Requirements : 650 Sq. Mtr.
Building Requirements : 400 Sq. Mtr.
Plant & Machinery and : Profile Grinder, Angular Head
Grinders, Centre Less Grinder, CNC Turing Centre, Broaching
Machines, Induction Hardening Machine, Tool Room, Vertical
Machining Centre, Tailor made special purpose machines
etc.
Electrical Installation : 500 KVA
Implementation Period : 24 Months
Manpower Required : 50
Raw Materials / Equipment :
Steel Bar, CRCA Sheets, Forgings, Castings Required
Total Project Cost : US$ 2.0 Million (excluding land & building)
Expected Annual Sales : US$ 3.0 Million
Profitability : 20%
Form of Offer
: Turnkey Project Offer
/ Joint Venture
TOPG
SECTOR – LIGHT ENGINEERING
18. Auto Parts
1.
Technology Description
The technology for manufacturing
various auto parts is fairly standard throughout the world. The most important part of the manufacturing
process is strict quality control of incoming high grade
raw material. The raw materials is then casted, moulded, machined,
drilled, bored, grinded, buffed etc. as per drawings on
precision machinery. The
parts finally manufactured are put to stringent quality
control, which bring out very reliable and stable products.
2.
Technology / Product
Status
The products manufactured
by the company for last 15 years carry very good reputation
throughout India
for their value for money and are also being exported to
Middle
East, Sri
Lanka, Bangladesh,
South Africa,
UK
and Canada etc. through Indian Export Houses.
Major Clients are in Sri
Lanka, Saudi
Arabia,
Dubai, Tunisia
etc.
3.
Company Profile
Company
Name
: M/s. AUTOMOTION INDUSTRIES
Address : 56/1288, Basement, Vardan House,
Chabi Ganj, Kashmiri Gate, Delhi – 110006,
India.
Tel. : +91-11- 23947015
Fax : +91-11- 23934557
Contact Person :
Mr. Arshad Jamal, Proprietor
E-mail : kamcoindia@hotmail.com
Web Site : www.kamcoindia.net
Year of Establishment : 1989
Product(s)
Manufactured
: Various Auto Parts : Suspension Parts –
like Shock Absorbers, Tie Rod Ends, Ball Joints, Rubber
Parts, Clutch Plates, Coil Springs, Filters etc.
Installed
Capacity per Annum
: 2,00,000 Pcs
Production (2002-03) : 1,00,000 Pcs
Sales Turnover (2002-03) : INR Rs. 13.5 Million (US$ 0.3 Million)
Exports
: INR Rs. 4.5 Million (US$ 0.1 Million)
Conformity to Standards : Indian Standards
Compliance to ISO : In Process
Foreign Collaboration : No
Manpower Total (Nos.) : 35
Raw Materials / Equipment Used : Aluminum
Sheet, Pig Iron, Sheets, Pipes, Rubber & Cork Sheets,
Iron Castings etc.
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project
Features
Project
: Auto Parts Manufacturing Plant
Capacity per Annum : 5,00,000 Pcs of
various sizes
Land Requirements : 1000 Sq. Mtr.
Building Requirements : 600 Sq. Mtr.
Plant & Machinery : Various
Sheet Metal Working Machinery, Tool Room, Dies costs are
not included since this will vary according to customer’s
requirement
Electrical Installation : 50 KW
Implementation Period : 12 Months
Manpower Required : 50
Raw Materials / Equipment : Galvanized Iron Sheets & Pipes, Rubber & Cork
Required Sheets, Iron Casting, Rubber & Plastic, Fasteners
Total Indicative Project Cost : US$ 0.2 Million (excluding land & building)
Expected Annual Sales : US$ 0.4 Million
Gross Profitability : Approx 30%
Form of Offer
: Turnkey Project Offer
/ Joint Venture
TOPG
SECTOR – LIGHT ENGINEERING
19. Exhaust System Assembly
for Automobiles
1.
Technology Description
Needless to say, the
performance of all internal combustion engines used in various
types of automobiles and generators depend to a great extent
on the exhaust assemblies.
Exhaust assemblies are
manufactured by bending pipes as per original drawings and
connecting them with flanged connectors and mufflers by
welding. Mufflers are large sized cylindrical bodies
which are fitted with internal cartridge assembly for smoke
absorption and sound dampening.
The other end of muffler is connected and welded
with comparatively smaller size pipe which is called tail
pipe. The process
requires precision die making, seamless welding and compatibility
with the engine and other mountings of the automobiles and
other original equipments manufacturers (OEMs).
2.
Technology / Product
Status
The company is in production
for last 27 years. The
technology is quite proven and the exhaust system developed
by the company is in huge demand for Original Equipment
Manufacturers (OEMs) and replacement market for all leading
automobiles and heavy vehicles in India. Silencers, Mufflers, Exhaust Pipes, Flexible
Pipes, Flanges, Complete Exhaust System Assemblies for Toyota,
Daewoo, Opel, Honda, Ford, BSA, Harlev Davidson, Maruti,
Hyundai, Mahindra, Fiat, Tata, Ashok
Leyland etc. have been developed and are in use in large
number of assemblies.
3.
Company Profile
Company
Name
: M/s. SHYAM ENGINEERING WORKS
Address : Shyam Engineering Works,
697-
Hamilton Road,
Kashmiri Gate, Delhi-110006, India.
Tel. : +91-11- 32110118, 23937296
Fax : +91-11- 22144243
Contact Person :
Mr. Rishi Babbar, General Manager
E-mail
: ravibabbar@now-india.net.in
Web Site : -
Year of Establishment : 1977
Product(s) Manufactured : Automobile Exhaust Systems, Silencers, Exhaust Pipes & Fuel
Tanks
Installed
Capacity Per Annum
: 100,000 Pcs
Production (2002-03) : 80,000 Pcs
Sales Turnover (2002-03) : INR Rs. 9 Million (US$ 0.2 Million)
Exports
: The company has
very good presence in the Indian market and now wishes
to export its technology
Conformity to Standards : Indian Standards
Compliance to ISO : In Process
Foreign Collaboration : No
Manpower Total (Nos.) : 30
Raw Materials / Equipment Used : CRC
Sheets & Pipes, Galvanized Aluminum Sheets & Pipes,
Stainless Steel Sheets and Tubes
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project
Features
Project
: To Manufacture Exhaust System Assemblies
for LCV, SUV, HCV, Generators, Bikes, Cars
& Trucks etc.
Capacity per Annum : 0.5 Million Pcs
Land Requirements : 1000 Sq. Mtr.
Building Requirements : 900 Sq. Mtr.
Plant & Machinery and : Tube Bending Machine, Seam Welding
Machine, Power Presses of 20 tons, 50 tons, 100 tons capacity,
Shearing Machines, Spot Welding Machines, MIG Welding
Machines, Sealing Machines, Flanging Machine, Sheet Rolling
Machine, Paint Booth, Generator, Hydraulic Press, Flaring
Machine, Pipe Cutters, Drill Machines, Small Tool Room
etc.
Electrical Installation : 50 KW
Implementation Period : 6 Months
Manpower Required : 20
Raw Materials / Equipment
: CRC Sheets & Pipes, Galvanized Aluminum
Sheets & Pipes, Stainless Steel
Sheets and Pipes, Asbestos Sheet Packing and Gaskets etc.
Total Project Cost : US$ 0.65 Million (excluding land & building)
Expected Annual Sales : US$ 0.75 Million
Profitability : Gross Profit 25-30%
Form of Offer
: Turnkey Project
TOPG
SECTOR – ELECTRONICS &
TELECOMMUNICATION
20. Telecom Switches for
Voice & Data Applications
1.
Technology Description
The telecom switches
(exchanges) in analog & digital type are extensively
used for providing varied communication requirements from
a business centre, hospital, hotels or large corporate organisations
to homes and small office segments.
To meet the latest and
futuristic requirements of convergence of voice, data and
video, the switches support features like VOIP, ADSI, IP
and Ethernet on an integrated platform.
The company has developed IRIS-IVDX switches.
Various protocol stacks such as El, ISDN-BRI, ISDN-PRI,
TCP/IP, H.323 (for VOIP), Q Sig. have been developed in house resulting in substantial
savings both in terms of upfront payment as also the on-going
OEM license fee. In
due course of time, blue tooth compatibility will also be
provided on demand. Optical Fibre Technology (OFT), the
media for high-speed communication can also be used to eliminate
the need for laying copper, which is not only tedious and
expensive, but also a very time consuming exercise.
2.
Technology / Product
Status
The company is in operation
for last 8 years. The products are in extensive use in India
and in South Africa,
Kenya,
Tanzania,
Uganda,
Zambia,
Mauritius,
Sri Lanka,
Bangladesh,
UAE, Oman,
Somalia
and Saudi Arabia,
France,
Morocco,
Nigeria,
Tunis etc.
3.
Company Profile
Company Name
: M/s. CORAL TELECOM LTD.
Address : C-28, Sector 7,
Noida (U.P.) – 201301, India
Tel. : +91-95120-2423492/93/94
Fax : +91-95120-2423343
Contact Person :
Mr. Rajesh Tuli, Managing Director
E-mail
: rajeshtuli@coraltele.com,
sandeeproy@coraltele.com
Web Site : www.coraltele.com
Year of Establishment : 1996
Product(s) Manufactured Used : The
company is involved in design,
development, manufacture, sales and support of telecommunication
switching equipment in analog and digital ranges from
6 to 6000 ports. The
company is also manufactures IRIS-IVDX switching systems
for integrated voice and data switching on UTOPIA, HDLC
and compact PCI platforms, supporting up to 43,000 ports.
Installed
Capacity per Annum
: Approx. 1000 Switches
Production
(2002-03) : 850 Switches
(2003-04)
: 1873 Switches
Sales
Turnover (2002-03)
: INR Rs. 159 Million (US$ 3.53 Million)
(2003-04) : INR Rs. 206 Million (US$ 4.57 Million)
Exports (2002-03) : INR Rs.
4 Million (US$ 0.09 Million)
(2003-04)
: INR Rs. 14.7 Million (US$ 0.33 Million)
Conformity to Standards : Indian Standards, CE/TUV, TES001, TBR3 & TBR4
Compliance to ISO : Yes
Foreign Collaboration : No
Manpower Total (Nos.) : 300
Raw Materials / Equipment Used : Printed
Circuit Boards, Integrated Circuits, Transformers and
Inductors, Modular Cabinets, Resistances, Capacitors,
Relays, Crystal
and Connectors etc.
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project
Features
Project
: Manufacturing Plant for TELECOM SWITCHES
for Voice and Data Applications
Capacity : 500 Switches of / upto 500 Ports
Land Requirements : 1000 Sq. Mtr.
Building Requirements : 600 Sq. Mtr.
Plant
& Machinery
: Oscilloscopes,
PCM Analysers, Soldering Stations, Testing Jigs, Tools,
Universal Programmer
Electrical Installation : 75 KW
Implementation Period : 1 Year
Manpower Required : 35
Raw Materials / Equipment
: Printed Circuit Boards, Integrated Circuits,
Transformers and Inductors, Modular Chassis and Cabinets,
Resistances, Capacitors, Relays, Crystals, Connectors,
Connecting Wires etc.
Total Project Cost : US$ 1.4 Million (excluding land & building)
Expected Annual Sales : US$ 2.00 Million
Profitability : 25 – 30%
Form of Offer
: Turnkey Project
TOPG
SECTOR
– ELECTRONICS & TELECOMMUNICATION
21. Traffic Signal Controllers
1.
Technology Description
With the heavy increase
in vehicular traffic on roads, regulation of movement of
vehicles on the crossings has assumed critical role and
for this traffic signal lights along with timers are essential
requirement.
The traffic signal lights
are put on STOP, LOOK and GO modes shown by red, yellow
and green lights for a predetermined time which is controlled
by microprocessors and relays.
The time period between the modes can be changed
as per requirement of traffic flow at a particular crossing.
The timers give warning of change of traffic lights
to the road users which helps in controlling the rash drivers
on the crossings.
The electronic circuits,
lights and timers are designed to withstand the rigrous
heat, rains and extreme colds.
In addition they are manufactured in modular designs
for easy service and maintenance.
2.
Technology / Product
Status
The company is in operation
for last 7 years. The
system designed and manufactured by the company have been installed
at various crossings witnessing heavy traffic in the cities
of Kolkata, Bhopal
and Durgapur etc.
3.
Company Profile
Company
Name
: M/s. ONNYX ELECTRONICS
Address
: D – 264,
Anand Vihar, Delhi – 110092.
Tel.
: 22383743
Fax : 22169763
Contact Person :
Mr. Jitendra Kaushik,
CEO
E-mail
: onnyx75@yahoo.com
Web Site : www.onnyxcatv.com
Year of Establishment : 1997
Product(s)
Manufactured
: Traffic Signal Controllers & Timer Aspects
etc.
Installed
Capacity per Annum
: 100 Systems
Production (2002-03) : 20 Systems
Sales Turnover (2002-03) : INR Rs. 16.5 Million (US$ 0.37 Million)
Exports
: Nil
Conformity to Standards : Indian Standards
Compliance to ISO : No
Foreign Collaboration : No
Manpower Total (Nos.) : 23
Raw Materials /Equipment Used : Arrays
of Light Emitting Diodes of Red, Amber & Green Colour,
Microprocessors, Cable Poles, Integrated Circuits, Aspects
and other Electronic Components
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project
Features
Project
: Manufacturing Plant for Traffic Signal Controllers
and Timers
Capacity per Annum : 100 Systems
Land Requirements : 200 Sq. M
Building Requirements : 100 Sq. M
Plant & Machinery and : Power Supplies, Precision Oscilloscopes,
Digital Multimeters / Voltmeters, LCR Meters, Power Factor
Meter, PCB & other Assembly Equipment etc.
Electrical Installation : 20 KW
Implementation Period : 6 Months
Manpower Required : 15
Raw Materials / Equipment : Arrays of Light Emitting Diodes of Red,
Amber & Green Colour, Microprocessors,
Cable Poles, Integrated Circuits, Aspects and other Electronic
Components
Total Project Cost : US$ 1.0 Million (excluding land & building)
Expected Annual Sales : US$ 2.0 Million
Profitability : 25%
Form of Offer
: Turnkey Project Offer
TOPG
SECTOR – ELECTRONICS & TELE COMMUNICATION
22. Embedded Technology
based Information Display Systems
1.
Technology Description
Information Display
Systems comprise of embedded networking of micro controllers
and interface devices viz kiosks, enquiry offices and computers
which transmit the information to the server.
The server in turn feeds the Device Network Buses
(DNB) for display with the help of a keypad and a
front-end software.
2.
Technology / Product
Status
The system is functioning
without any complaints at Patna
(Bihar) India
and many other Railway Stations in Uttar
Pradesh, India.
The technology cuts down on power consumption and recurring
expenditure on utilities like air conditioning, large capacity
uninterrupted power supplies (UPS) etc.
3.
Company Profile
Company
Name
: M/s. EMBEDDED TECHSYSTEM PROMOTION ORGANISATION
Address : 501, Kushal Bazar, 32-33,
Nehru Place,
New Delhi-110019.
Tel. : 91-11-26466728, 31076829
Fax : 91-11-26466728
Contact Person :
Ms. Seema Agarwal
E-mail
: agarwalseema@hotmail.com
Web Site : www.ambdded.com
Year of Establishment : 2003
Product(s)
Manufactured
: Following products have been developed for
production by entrepreneurs
t Embedded Technology
based information display system
t
Real Time operating System
t Embedded Lan Card
t Enquiry Terminals
t Electronic Vending
Machines
t
Electronic Billing Machines
Installed
Capacity per Annum
: Not Applicable
Production
(2002-03)
: More than 50 embedded technology based products
developed
Sales Turnover (2002-03) : Not Applicable
Exports
: Nil
Conformity to Standards : Indian Standards
Compliance to ISO : No
Foreign Collaboration : No
Manpower Total (Nos.) : 6
Raw Materials / Equipment Used : Electronic
Components, Micro Processors, Relays, Computer Parts,
Peripherals & Display Board in the LED Arrays
Effluent Generated : Nil
4.
Broad Profile of Project Offer
Project
Features
Project
: To Manufacture Embedded Technology based
Information Display Systems
Capacity : 100 Per Year
Land Requirements : 250 Sq. Mtr.
Building Requirements : 150 Sq. Mtr.
Plant &
Machinery and : Oscilloscope, Digital Multimeter,
Logic Tester, DNB Tester, SNB Tester, Mother
Board Tester, Network Card Tester etc.
Electrical Installation : 7.5 KW
Implementation Period : 6 Months
Manpower Required : 6-8
Raw Materials / Equipment
: Electronic Components, Micro Processors,
Relays, Computer Parts, Peripherals,
Display Board, LED Arrays, Digital ICs, PCBs
Total Project Cost : US$ 0.035 Million (excluding land &
building)
Expected Annual Sales : US$ 0.050 Million
Profitability : 30%
Form of Offer
: Turnkey Project
TOPG
Conclusions
& Recommendations
Conclusions
A
large number of Owners, Chief Executives and Senior Managers
of SMEs located in National Capital Region were interviewed
for obtaining their views on export of technologies / projects.
Most
of the Chief Executives agreed in one to one meetings, that
export of technologies / projects from SSIs would prove
beneficial in the long run.
Following
conclusions have been drawn from these meetings and general
surveys of the industrial units :-
·
Prominent
Sectors of operations of SMEs in NCR are : Electricals,
Light Engineering (Mechanical),
Garments, Auto Parts, Electronics, Computers, Chemicals.
· The
projects offered by SMEs are tried, tested and productionised
by them in the country.
· SME
units in NCR are aware of global competitiveness and willing
to adapt technologies / products to the requirements of
demanding customers.
·
Most of the SMEs are taking steps for ISO certification,
but lack adequate awareness about World Trade
Organisation (WTO) regulations and Intellectual Property
Rights (IPR) issues etc.
·
Many of the SMEs have potential to export high technology
and high technology intensive projects and
products, but expect incentives as offered by other countries
like China, Taiwan and South Korea etc.
·
Many SMEs suggested single window clearance system to avoid
procedural delays.
·
Most of the SMEs are not very keen to look beyond product
exports. They are reluctant or unwilling to explore
technology / project exports and the long term benefits
associated with it.
·
Preferred
target markets by the exporters for technology export promotion
are : SAARC, Middle East, Africa and EU.
·
Preferred target markets by the exporters
for technology export promotion are : SAARC, Middle East,
Africa and EU.
Recommendations
1. A
single window should be created in the appropriate Ministry
wherein the exporters get all export related information
and clearances promptly.
2. The
potential exporters should establish contact with foreign
embassies in India and with embassies / missions abroad
to obtain lists of manufacturing associations and companies
in the target countries and explore opportunities for doing
business with them.
3. Interaction
meets between embassies and government departments / industries
associations may be organized to apprise embassies about
the market information needs of our industries for promoting
technology trade.
4. Seminars
/ conferences may be organized to create awareness about
(a) exporter’s capabilities (b) market requirements (c)
WTO and IPR related issues and enhancing linkages between
R&D system and industry.
5. Buyer
– Seller meets may be organized in India between the visiting
foreign industrial delegations and suppliers of technologies
/ projects and also outside India where a group of Indian
companies camp in the target market to interact with prospective
buyers.
6. The
potential exporters should be provided opportunities and
facilities to participate in technology related exhibitions
in India and abroad.
7. Government
should review policies and incentives for promoting technology
intensive exports in India and other countries to formulate
innovative policies for the benefits of our industries.
